Tokico Flow Meter Root & CCG
Accuracy : + / – 0.5%
Flow Rate : 0.004 ~ 160 m3/ h
Max. Working Pres. : 25 kgf/ cm2
Fluid Temperature : -5 ~ 150 degree C
Connection size : 25mm( 1 ” ) ~ 100mm( 4 ” )
Applicable fluid : Petroleum, Petrochemical, etc
| Applicable fluid | Petroleum, Petrochemical, etc | |
| Accurac | ± 0.5 | |
| With accuracy adjuster | ± 0.2% | |
| Flow rate range | 0.004 ~ 160m³/h | |
| Fluid temperatur | ‘-5 ~ 150ºC(50°C is Max. In case of roots material AC7A 150ºC is Max. In case of FC200) | |
| Max. Working pressur | Max, 2.5MPa {25kgf/cm²} | |
| Fluid viscosit | Max. 150,000mPa s {150,000cP} | |
| Connection size | 25mm(1B)~100mm(4B | |
| Flange rating | FC 2 5 0 : JIS 10K FFFCD400 : JIS 10K FF
SC PH 2 : (JIS 10K,20K RF ANSI JP11500,300 RF) |
|
| Material | Main Body | FC 2 5 0 : (capacity 35 – 52 type)FCD400 : (capacity 35 – 41 type)
SC PH 2 : (capacity 35 – 52 type) However, the connection size 80mm of 45 type is excluded |
| Rotor | FC200, AC7A or AD | |
| Rotor Shaft | SUS416 hard chrome plating | |
| Bearing | C5191 C5191, FC, ball bearing | |
| Driving Gear | SUS420J2 | |
| Piping installation | Horizontal or Vertical piping | |
| Paint color | Mancell 1.4PB3.1/1.2 | |
Custom Search
Dear Sir
I like to use your flow meter to measure the fuel consumption of the diesel generator. I would like to know the per hour how much liter diesel use the diesel generator. Inlet pipe line dia is 0.75″ to 1″, please let me know could I use this flow meter for this purpose or not? Please let me know the price of your flow meter. My email is hayderchowdhury@yahoo.com. Waiting for your reply soon.
Hayder